 |
| JOINTERS |
| |
 |
PF 41 | Jointer with cast iron tables 2610 x 410 mm (102¾” x 16¼”).
Infeed table height adjustment through quick action lever.
Download the leaflet in PDF format
|
 |
PF 52 | Jointer planer with cast iron tables 2720 x 520 mm (107” x 20½”).
Infeed table height adjustment through quick action lever.
Download the leaflet in PDF format
|
| |
| PLANERS |
| |
 |
PS 52 | Heavy-duty Planer. Four feed speed, powered raise & fall on 4 columns, 250 mm (9¾”) maximum working height are part of the standard composition of the machine.
Download the leaflet in PDF format
|
 |
PS 63 | Heavy-duty Planer. Four feed speed, powered raise & fall on 4 columns, 300 mm (11¾”) maximum working height are part of the standard composition of the machine.
Download the leaflet in PDF format
|
| |
| SLIDING TABLE PANEL SAWS |
| |
 |
SC 31 | Sliding table panel saw with manual movements and saw blade ø 315 mm (12.40”) with scoring blade on.
Available, on request, with electronic digital readout of parallel fence position.
Download the leaflet in PDF format
|
 |
SC 40 | Sliding table panel saw with manual movements and saw blade ø 400 mm (15.74”) with scoring blade on.
Available, on request, with electronic digital readout of parallel fence position or with NC control of parallel fence position.
Download the leaflet in PDF format
|
 |
SC 40 M | Sliding table panel saw with powered movements and saw blade ø 400 mm (15.74”) with scoring blade on.
Available, on request, with electronic digital readout of parallel fence position or with NC control of parallel fence position.
Download the leaflet in PDF format
|
| |
| SHAPERS |
| |
 |
F 23 | Heavy-duty Shaper with fixed spindle.
The heavy-duty construction makes this machine the ideal solution for the most demanding customers.
Available in basic version, with heavy duty tenoning table (“T” version), with cast iron side extension tables and front support bar for profiling (“LL” version) and with heavy duty tenoning table, cast iron side extension table on the right and front support bar for profiling (“TL” version).
Download the leaflet in PDF format
|
 |
F 25 | Heavy duty Shaper with tilting spindle - 45° ÷ + 45°.
The tilting spindle makes the F 25 a machine extremely flexible and versatile suitable to any working requirement.
Available in basic version, with heavy duty tenoning table (“T” version), with cast iron side extension tables and front support bar for profiling (“LL” version) and with heavy duty tenoning table, cast iron side extension table on the right and front support bar for profiling (“TL” version).
Download the leaflet in PDF format
|
